top of page

MLH6

      Carson's versatile MLH6 dual color led light has arrived! It features 12 high intensity LEDs packed into a super thin housing. With 12 different flash patterns, steady burn, and cruise mode (programmable for each color), this light is up for anything! The MLH6 is designed to surface mount with the BM6 bezel, or can snap in to the IMOD2 housing for an outstanding dual head option. Stay tuned for more modular mounting options coming soon from Carson!

Light_1_edited.png

Features:

  • Ultra Thin bezel mount

  • 12 different high intensity LED light with 12 different flash patterns

  • Programmable full Steady Burn or Cruise Mode for any color

  • Two independent enable lines, one for each color 

  • Programmable options for each enable line include pattern, phase, steady burn 

  • Can be controlled by an external flasher

  • Protection over entire operating voltage 

  • New base w/o mounting ears allows sealed light to be independent from mounting stress forces by “floating” under mounting bezel 

  • Ultrasonic weld fuses lens to plastic base providing maximum weather tight seal 

 

Light_2.png

Specs:

Dimensions: 1”H x 4 5/ 16”W x 7/ 16”D  
Voltage: 10-16V DC  
Amp draw: 0.2 amps 
Approvals: SAE Class I, available where applicable 
*approvals only apply when properly configured
IPx7 water protection

BM6

The BM6 bezel mount allows you to surface mount the MLH6, giving you a clean, low profile look.

bh6-03 white
bh6 white
bh6-02 white

IMOD2

The IMOD2 by Carson is a dual head chassis and is made to fit 2 MLH6 lightheads. The IMOD2 includes chassis and an adjustable "L" bracket for countless mounting options.

Screen Shot 2022-12-27 at 1.48.51 PM
Screen Shot 2022-12-27 at 1.49.29 PM
Screen Shot 2022-12-27 at 1.49.45 PM
Screen Shot 2022-12-27 at 1.50.06 PM
Screen Shot 2022-12-27 at 1.48.07 PM
Screen Shot 2022-12-27 at 1.47.31 PM
Screen Shot 2022-12-27 at 1.47.04 PM
Screen Shot 2022-12-27 at 1.50.36 PM
bottom of page